PiWifiAP/ap-setup.sh

#!/bin/bash

#    ap-setup.sh
#    OpenDRS Online Discrepancy Reporting System
#    Copyright (C) 2022  Rod Wright

#    SPDX-License-Identifier: GPL-2.0

# Wireless Access Point Raspberry Pi Setup

function get_ap_params() {
    echo ""
    wapssidok="no"
    while [[ "$wapssidok" == "no" ]]
    do
        echo "This access point will need an SSID. This is what will appear"
        echo "as the name of this terminal when other devices connect."
        echo -n "Please enter the desired SSID for this access point:  "
        read wapssid
        if [[ "$wapssid" = "" ]]
        then
            echo "SSID cannot be blank. Try again."
        else
            wapssidok="yes"
        fi
    done
    wappassok="no"
    while [[ "$wappassok" == "no" ]]
    do
        echo "You will need to set a passphrase for this access point. It should"
        echo "be at least 8 characters in length and cannot be blank."
        echo -n "Please enter the desired passphrase for this access point:  "
        read wappass
        wappasslen=$(echo -n $wappass | wc -m)
        if [[ "$wappass" == "" || $wappasslen -lt 8 ]]
        then
            echo "Passphrase doesn't satisfy requirements above. Try again."
        else
            wappassok="yes"
        fi
    done
    # Save parameters in config file
    sed -i 's,'wapssid=.*','wapssid="\"$wapssid\""',' /etc/piwifiap.conf
    sed -i 's,'wappass=.*','wappass="\"$wappass\""',' /etc/piwifiap.conf
}

function config_systemd-networkd() {
	echo "Configuring as wireless access point using systemd-networkd."
	get_ap_params
	# Save network system in config file
	sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap.conf
	
	apt install hostapd
	systemctl unmask hostapd
	systemctl enable hostapd
	echo "[NetDev]" >/etc/systemd/network/bridge-br0.netdev
	echo "Name=br0" >>/etc/systemd/network/bridge-br0.netdev
	echo "Kind=bridge" >>/etc/systemd/network/bridge-br0.netdev
	echo "[Match]" >/etc/systemd/network/br0-member-eth0.network
	echo "Name=eth0" >>/etc/systemd/network/br0-member-eth0.network
	echo "" >>/etc/systemd/network/br0-member-eth0.network
	echo "[Network]" >>/etc/systemd/network/br0-member-eth0.network
	echo "Bridge=br0" >>/etc/systemd/network/br0-member-eth0.network
	systemctl enable systemd-networkd
	mv /etc/dhcpcd.conf /etc/dhcpcd.conf.old
	echo "denyinterfaces wlan0 eth0" >/etc/dhcpcd.conf
	cat /etc/dhcpcd.conf.old >>/etc/dhcpcd.conf
	echo "interface br0" >>/etc/dhcpcd.conf
	rfkill unblock wlan
	echo "country_code=US" >/etc/hostapd/hostapd.conf
	echo "interface=wlan0" >>/etc/hostapd/hostapd.conf
	echo "bridge=br0" >>/etc/hostapd/hostapd.conf
	echo "ssid=$wapssid" >>/etc/hostapd/hostapd.conf
	echo "hw_mode=g" >>/etc/hostapd/hostapd.conf
	echo "channel=7" >>/etc/hostapd/hostapd.conf
	echo "macaddr_acl=0" >>/etc/hostapd/hostapd.conf
	echo "auth_algs=1" >>/etc/hostapd/hostapd.conf
	echo "ignore_broadcast_ssid=0" >>/etc/hostapd/hostapd.conf
	echo "wpa=2" >>/etc/hostapd/hostapd.conf
	echo "wpa_passphrase=$wappass" >>/etc/hostapd/hostapd.conf
	echo "wpa_key_mgmt=WPA-PSK" >>/etc/hostapd/hostapd.conf
	echo "wpa_pairwise=TKIP" >>/etc/hostapd/hostapd.conf
	echo "rsn_pairwise=CCMP" >>/etc/hostapd/hostapd.conf
	if dpkg -l|grep webmin >/dev/null 2>&1
	then
		wget -c http://github.com/pjz/webmin-modules/releases/download/v1.0/hostap.wbm.gz
		gzip -d hostap.wbm.gz
		/usr/share/webmin/install-module.pl hostap.wbm
	fi
	echo ""
	echo ""
}

function config_NetworkManager() {
	echo "Configuring as wireless access point using NetworkManager."
	rfkill unblock wlan
	get_ap_params
	
	# Clean up a possible failed previous attempt
	nmcli con del piwifi-ap >/dev/null 2>&1
	nmcli con del piwifi-ethernet >/dev/null 2>&1
	nmcli con del piwifi-apbridge >/dev/null 2>&1
	
	# Save network system in config file
	sed -i 's,'network_system=.*','network_system="\"NetworkManager\""',' /etc/piwifiap.conf
	
	nmcli device wifi hotspot ssid $wapssid password $wappass
	nmcli connection add type bridge con-name 'Bridge' ifname bridge0
	nmcli connection add type ethernet slave-type bridge con-name 'Ethernet' ifname eth0 master bridge0
	nmcli connection modify 'Hotspot' master bridge0
	nmcli connection up Bridge
	nmcli connection up Hotspot
}

current_user=$(whoami)
if [[ "$current_user" != "root" ]]
then
	echo "You must have root privileges to run this setup."
	echo "Try 'sudo $0'"
	exit 1
fi
echo ""
echo ""
echo "If this terminal connects to a network using ethernet, it can be configured"
echo "as a wireless access point for other terminals. Would you like to configure"
echo -n "this terminal as an access point? [y/N]: "
read wapconf
if [[ "$wapconf" == "Y" || "$wapconf" == "y" ]]
then
	# Determine if we are using NetworkManager or systemd-networkd
    echo ""
    echo "Copying files..."
    chmod +x apsetup/usr/local/bin/*
    cp -Rv apsetup/usr/local/bin/* /usr/local/bin
    cp -Rv apsetup/etc/* /etc
    if systemctl status dhcpcd.service|grep -q "Active: active (running)"
    then
        config_systemd-networkd
	elif systemctl status NetworkManager.service|grep -q "Active: active (running)"
    then
        config_NetworkManager
    else
        echo "Unable to determine what type of network configuration (systemd-networkd"
        echo "or NetworkManager) your system uses. Automatic setup cannot continue."
        exit 1
    fi
    
    echo "Wireless access point setup is complete. It will be"
	echo "automatically enabled after reboot. To change the SSID or"
	echo "passphrase in the future, run:"
    echo " sudo wap-setssid"
    echo "or:"
    echo " sudo wap-setpassphrase"
    echo "at a command prompt."
	echo ""
	echo "To disable the access point altogether in the future, run:"
	echo "	sudo wap-disable"
	echo "at a command prompt and reboot the terminal. To re-enable it, run:"
	echo "	sudo wap-enable"
	echo "at a command prompt and reboot the terminal."
	echo ""
	echo -n "Press enter key to continue..."
	read cont
else
	exit 2
fi