Set executable permissions on files in /usr/local/bin

VERSION.txt

@@ -0,0 +1 @@
+2.0.0

ap-setup.sh

@@ -7,69 +7,49 @@
 #    SPDX-License-Identifier: GPL-2.0
 
 # Wireless Access Point Raspberry Pi Setup
+
 function get_ap_params() {
     echo ""
-    wapssidok=0
-    while [ "$wapssidok" -ne 1 ]
+    wapssidok="no"
+    while [[ "$wapssidok" == "no" ]]
     do
         echo "This access point will need an SSID. This is what will appear"
         echo "as the name of this terminal when other devices connect."
         echo -n "Please enter the desired SSID for this access point:  "
         read wapssid
-        if [ "$wapssid" = "" ]
+        if [[ "$wapssid" = "" ]]
         then
             echo "SSID cannot be blank. Try again."
         else
-            wapssidok=1
+            wapssidok="yes"
         fi
     done
-    wappassok=0
-    while [ "$wappassok" -ne 1 ]
+    wappassok="no"
+    while [[ "$wappassok" == "no" ]]
     do
         echo "You will need to set a passphrase for this access point. It should"
         echo "be at least 8 characters in length and cannot be blank."
         echo -n "Please enter the desired passphrase for this access point:  "
         read wappass
-        wappasslen=`echo -n $wappass | wc -m`
-        if [ "$wappass" = "" -o "$wappasslen" -lt 8 ]
+        wappasslen=$(echo -n $wappass | wc -m)
+        if [[ "$wappass" == "" || $wappasslen -lt 8 ]]
         then
             echo "Passphrase doesn't satisfy requirements above. Try again."
         else
-            wappassok=1
+            wappassok="yes"
         fi
     done
     # Save parameters in config file
-    sed -i 's,'wapssid=.*','wapssid="\"$wapssid\""',' /etc/piwifiap.conf
-    sed -i 's,'wappass=.*','wappass="\"$wappass\""',' /etc/piwifiap.conf
+    sed -i 's|'wapssid=.*'|'wapssid="\'$wapssid\'"'|' /etc/piwifiap/piwifiap.conf
+	sed -i 's|'wappass=.*'|'wappass="\'$wappass\'"'|' /etc/piwifiap/piwifiap.conf
+	sed -i 's|'802-11-wireless-security.psk:.*'|'802-11-wireless-security.psk:$wappass'|' /etc/piwifiap/piwifiap.secret
 }
 
-current_user=`whoami`
-if [ "$current_user" != "root" ]
-then
-	echo "You must have root privileges to run this setup."
-	echo "Try 'sudo $0'"
-	exit 1
-fi
-echo ""
-echo ""
-echo "If this terminal connects to a network using ethernet, it can be configured"
-echo "as a wireless access point for other terminals. Would you like to configure"
-echo -n "this terminal as an access point? [y/N]: "
-read wapconf
-if [ "$wapconf" = "Y" -o "$wapconf" = "y" ]
-then
-	# Determine if we are using NetworkManager or systemd-networkd
-    echo ""
-    echo "Copying files..."
-    chmod +x apsetup/usr/local/bin/*
-    cp -Rv apsetup/usr/local/bin/* /usr/local/bin
-    cp -Rv apsetup/etc/* /etc
-    if systemctl status dhcpcd.service|grep -q "Active: active (running)"
-    then
+function config_systemd-networkd() {
 	echo "Configuring as wireless access point using systemd-networkd."
 	get_ap_params
-        # Save network system in config file
-        sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap.conf
+	# Save network system type in config file
+	sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap/piwifiap.conf
 	
 	apt install hostapd
 	systemctl unmask hostapd
@@ -110,45 +90,75 @@ then
 	fi
 	echo ""
 	echo ""
-	elif systemctl status NetworkManager.service|grep -q "Active: active (running)"
-    then
+}
+
+function config_NetworkManager() {
 	echo "Configuring as wireless access point using NetworkManager."
 	rfkill unblock wlan
 	get_ap_params
 	
 	# Clean up a possible failed previous attempt
-        nmcli con del piwifi-ap >/dev/null 2>&1
+	nmcli con del piwifi-hotspot >/dev/null 2>&1
 	nmcli con del piwifi-ethernet >/dev/null 2>&1
-        nmcli con del piwifi-apbridge >/dev/null 2>&1
+	nmcli con del piwifi-bridge >/dev/null 2>&1
 
-        # Save network system in config file
-        sed -i 's,'network_system=.*','network_system="\"NetworkManager\""',' /etc/piwifiap.conf
 	
-        nmcli con add type bridge \
-        con-name piwifi-apbridge \
-        ifname bridge0
+	# Save network system type in config file
+	sed -i 's|'network_system=.*'|'network_system="\"NetworkManager\""'|' /etc/piwifiap/piwifiap.conf
 		
-        nmcli con add type ethernet \
-        slave-type bridge \
-        con-name piwifi-ethernet \
-        ifname eth0 \
-        master bridge0
+	# create bridge interface
+	nmcli con add type bridge con-name piwifi-bridge ifname bridge0
 	
-        nmcli con add type wifi \
-        ifname wlan0 \
-        con-name piwifi-ap \
-        autoconnect yes \
-        ssid "$wapssid" \
-        slave-type bridge \
-        master bridge0 \
-        wifi-sec.key-mgmt wpa-psk \
-        wifi-sec.psk "$wappass" \
-        802-11-wireless.mode ap \
-        802-11-wireless.band bg 
+	# add ethernet to bridge
+	nmcli con add type ethernet slave-type bridge con-name piwifi-ethernet ifname eth0 master bridge0
 	
-        nmcli con up piwifi-apbridge
-        nmcli con up piwifi-ethernet
-        nmcli con up piwifi-ap
+	# create access point
+	nmcli con add type wifi ifname wlan0 mode ap con-name piwifi-hotspot ssid $wapssid
+	nmcli con modify piwifi-hotspot wifi-sec.key-mgmt wpa-psk
+	nmcli con modify piwifi-hotspot 802-11-wireless.band bg
+	# disable protected management frames for wpa_supplicant bug in trixie
+	nmcli con modify piwifi-hotspot 802-11-wireless-security.pmf 1
+
+	# add wifi to bridge
+	nmcli con modify piwifi-hotspot master bridge0 slave-type bridge
+
+	# activate bridge
+	nmcli con up piwifi-bridge
+
+	# activite wifi
+	nmcli con up piwifi-hotspot passwd-file /etc/piwifiap/piwifiap.secret
+
+}
+
+current_user=$(whoami)
+if [[ "$current_user" != "root" ]]
+then
+	echo "You must have root privileges to run this setup."
+	echo "Try 'sudo $0'"
+	exit 1
+fi
+echo ""
+echo ""
+echo "If this system connects to a network using ethernet, it can be configured"
+echo "as a wireless access point for other systems. Would you like to configure"
+echo -n "this system as an access point? [y/N]: "
+read wapconf
+if [[ "$wapconf" == "Y" || "$wapconf" == "y" ]]
+then
+	# Determine if we are using NetworkManager or systemd-networkd
+    echo ""
+    echo "Copying files..."
+    chmod +x apsetup/usr/local/bin/wap-*
+    cp -R apsetup/usr/local/bin/* /usr/local/bin/
+    cp -R apsetup/etc/* /etc/
+	chown -R root:root /etc/piwifiap
+	chmod 600 /etc/piwifiap/*
+    if systemctl status dhcpcd.service|grep -q "Active: active (running)"
+    then
+        config_systemd-networkd
+	elif systemctl status NetworkManager.service|grep -q "Active: active (running)"
+    then
+        config_NetworkManager
     else
         echo "Unable to determine what type of network configuration (systemd-networkd"
         echo "or NetworkManager) your system uses. Automatic setup cannot continue."
@@ -165,12 +175,23 @@ then
 	echo ""
 	echo "To disable the access point altogether in the future, run:"
 	echo "	sudo wap-disable"
-	echo "at a command prompt and reboot the terminal. To re-enable it, run:"
+	echo "at a command prompt and reboot. To re-enable it, run:"
 	echo "	sudo wap-enable"
-	echo "at a command prompt and reboot the terminal."
+	echo "at a command prompt and reboot."
 	echo ""
-	echo -n "Press enter key to continue..."
-	read cont
+	echo "The system must be rebooted for the configuration to take effect."
+	echo ""
+	read -p "Would you like to reboot now? [Y/n]: " -r rebootok
+	case "$rebootok" in
+		"y" | "Y" | "")
+			reboot
+			;;
+		*)
+			echo "You may continue to use the system, but the access point will not be"
+			echo "functional until you reboot."
+			exit 0
+			;;
+	esac
 else
 	exit 2
 fi

apsetup/etc/piwifiap/piwifiap.secret

@@ -0,0 +1 @@
+802-11-wireless-security.psk:none

apsetup/etc/webmin/custom/1630026603.cmd

@@ -1,3 +0,0 @@
-sudo wap-enable
-Enable Wireless Access Point
-* 0 1 0 0 0 0 0 -

apsetup/etc/webmin/custom/1630026603.html

@@ -1 +0,0 @@
-

apsetup/etc/webmin/custom/1630026756.cmd

@@ -1,3 +0,0 @@
-sudo wap-disable
-Disable Wireless Access Point
-* 0 1 0 0 0 0 0 -

apsetup/etc/webmin/custom/1630026756.html

@@ -1 +0,0 @@
-

apsetup/etc/webmin/custom/1630027149.edit

@@ -1,11 +0,0 @@
-/etc/hostapd/hostapd.conf
-Edit Wireless Access Point Parameters
-
-
-
-
-systemctl restart hostapd
-0
-0
-
-

apsetup/etc/webmin/custom/1630027149.html

@@ -1 +0,0 @@
-

apsetup/etc/webmin/custom/config

@@ -1,8 +0,0 @@
-display_mode=1
-params_file=0
-params_cmd=0
-columns=1
-height=
-wrap=
-width=
-sort=

apsetup/usr/local/bin/wap-disable

@@ -9,19 +9,21 @@ then
 	exit 1
 fi
 
-source /etc/piwifiap.conf
+source /etc/piwifiap/piwifiap.conf
 
-if [ "$network_system" = "systemd-networkd" ]
-then
+case "$network_system" in
+	"systemd-networkd")
 		systemctl stop hostapd
 		systemctl disable hostapd
-elif [ "$network_system" = "NetworkManager" ]
-then
-    nmcli con down piwifi-ap
-    nmcli con mod piwifi-ap autoconnect no
-else
+		;;
+	"NetworkManager")
+		nmcli con down piwifi-hotspot
+		nmcli con mod piwifi-hotspot autoconnect no
+		;;
+	*)
 		echo "Unable to determine what type of network configuration (systemd-networkd"
 		echo "or NetworkManager) your system uses."
 		echo "Cannot disable wireless access point."
 		exit 2
-fi
+		;;
+esac

apsetup/usr/local/bin/wap-enable

@@ -9,20 +9,21 @@ then
 	exit 1
 fi
 
-source /etc/piwifiap.conf
+source /etc/piwifiap/piwifiap.conf
 
-if [ "$network_system" = "systemd-networkd" ]
-then
+case "$network_system" in
+	"systemd-networkd")
 		systemctl enable hostapd
 		systemctl start hostapd
-elif [ "$network_system" = "NetworkManager" ]
-then
-    nmcli con mod piwifi-ap autoconnect yes
-    nmcli con up piwifi-ap
-else
+		;;
+	"NetworkManager")
+		nmcli con mod piwifi-hotspot autoconnect yes
+		nmcli con up piwifi-hotspot passwd-file /etc/piwifiap/piwifiap.secret
+		;;
+	*)
 		echo "Unable to determine what type of network configuration (systemd-networkd"
 		echo "or NetworkManager) your system uses."
 		echo "Cannot enable wireless access point."
 		exit 2
-fi
-
+		;;
+esac

apsetup/usr/local/bin/wap-setpassphrase

@@ -9,39 +9,41 @@ then
 	exit 1
 fi
 
-source /etc/piwifiap.conf
+source /etc/piwifiap/piwifiap.conf
 
-newppok=0
-while [ "$newppok" -ne 1 ]
+wappassok="no"
+while [[ "$wappassok" == "no" ]]
 do
-    echo -n "New passphrase: "
-    read newpp
-    newpplen=`echo -n $newpp | wc -m`
-    if [ "$newpp" = "" -o "$newpplen" -lt 8 ]
+	echo "You will need to set a passphrase for this access point. It should"
+	echo "be at least 8 characters in length and cannot be blank."
+	echo -n "Please enter the desired passphrase for this access point:  "
+	read wappass
+	wappasslen=$(echo -n $wappass | wc -m)
+	if [[ "$wappass" == "" || $wappasslen -lt 8 ]]
 	then
-        echo "Passphrase didn't satisfy requirements. Try again or hit <ctrl>-c to abort."
+		echo "Passphrase doesn't satisfy requirements above. Try again."
 	else
-        newppok=1
+		wappassok="yes"
 	fi
 done
 
-if [ "$network_system" = "systemd-networkd" ]
-then
-    sed -i "/wpa_passphrase=.*/c wpa_passphrase=$newpp" /etc/hostapd/hostapd.conf
+case "$network_system" in
+	"systemd-networkd")
+		sed -i "/wpa_passphrase=.*/c wpa_passphrase=$wappass" /etc/hostapd/hostapd.conf
     	systemctl restart hostapd
-elif [ "$network_system" = "NetworkManager" ]
-then
-    nmcli con down piwifi-ap
-    nmcli con mod piwifi-ap wifi-sec.psk "$newpp"
-    nmcli con up piwifi-ap
-else
+		sed -i 's|'wappass=.*'|'wappass="\'$wappass\'"'|' /etc/piwifiap/piwifiap.conf
+		sed -i 's|'802-11-wireless-security.psk:.*'|'802-11-wireless-security.psk:$wappass'|' /etc/piwifiap/piwifiap.secret
+		;;
+	"NetworkManager")
+		nmcli con down piwifi-hotspot
+		sed -i 's|'wappass=.*'|'wappass="\'$wappass\'"'|' /etc/piwifiap/piwifiap.conf
+		sed -i 's|'802-11-wireless-security.psk:.*'|'802-11-wireless-security.psk:$wappass'|' /etc/piwifiap/piwifiap.secret
+		nmcli con up piwifi-hotspot passwd-file /etc/piwifiap/piwifiap.secret
+		;;
+	*)
 		echo "Unable to determine what type of network configuration (systemd-networkd"
 		echo "or NetworkManager) your system uses."
 		echo "Cannot modify wireless access point parameters."
 		exit 2
-fi
-
-sed -i 's,'wappass=.*','wappass="\"$newpp\""',' /etc/piwifiap.conf
-
-
-    
+		;;
+esac

apsetup/usr/local/bin/wap-setssid

@@ -9,37 +9,39 @@ then
 	exit 1
 fi
 
-source /etc/piwifiap.conf
+source /etc/piwifiap/piwifiap.conf
 
-newssidok=0
-while [ "$newssidok" -ne 1 ]
+wapssidok="no"
+    while [[ "$wapssidok" == "no" ]]
     do
-	echo -n "New SSID: "
-	read newssid
-	if [ "$newssid" = "" ]
+        echo "This access point will need an SSID. This is what will appear"
+        echo "as the name of this terminal when other devices connect."
+        echo -n "Please enter the desired SSID for this access point:  "
+        read wapssid
+        if [[ "$wapssid" = "" ]]
         then
-		echo "SSID cannot be blank. Try again or hit <ctrl>-c to abort."
+            echo "SSID cannot be blank. Try again."
         else
-		newssidok=1
+            wapssidok="yes"
         fi
     done
 
-if [ "$network_system" = "systemd-networkd" ]
-then
-    sed -i "/ssid=.*/c ssid=$newssid" /etc/hostapd/hostapd.conf
+case "$network_system" in
+	"systemd-networkd")
+		sed -i "/ssid=.*/c ssid=$wapssid" /etc/hostapd/hostapd.conf
     	systemctl restart hostapd
-elif [ "$network_system" = "NetworkManager" ]
-then
-    nmcli con down piwifi-ap
-    nmcli con mod piwifi-ap ssid "$newssid"
-    nmcli con up piwifi-ap
-else
+		sed -i 's|'wapssid=.*'|'wapssid="\'$wapssid\'"'|' /etc/piwifiap/piwifiap.conf
+		;;
+	"NetworkManager")
+		nmcli con down piwifi-hotspot
+		nmcli con mod piwifi-hotspot ssid "$wapssid"
+		nmcli con up piwifi-hotspot passwd-file /etc/piwifiap/piwifiap.secret
+		sed -i 's|'wapssid=.*'|'wapssid="\'$wapssid\'"'|' /etc/piwifiap/piwifiap.conf
+		;;
+	*)
 		echo "Unable to determine what type of network configuration (systemd-networkd"
 		echo "or NetworkManager) your system uses."
 		echo "Cannot modify wireless access point parameters."
 		exit 2
-fi
-
-sed -i 's,'wapssid=.*','wapssid="\"$newssid\""',' /etc/piwifiap.conf
-
-
+		;;
+esac