Changes for bookworm NetworkManager

ap-setup.sh

@@ -40,15 +40,16 @@ function get_ap_params() {
         fi
     done
     # Save parameters in config file
-    sed -i 's,'wapssid=.*','wapssid="\"$wapssid\""',' /etc/piwifiap.conf
-    sed -i 's,'wappass=.*','wappass="\"$wappass\""',' /etc/piwifiap.conf
+    sed -i 's|'wapssid=.*'|'wapssid="\'$wapssid\'"'|' /etc/piwifiap/piwifiap.conf
+	sed -i 's|'wappass=.*'|'wappass="\'$wappass\'"'|' /etc/piwifiap/piwifiap.conf
+	sed -i 's|'802-11-wireless-security.psk:.*'|'802-11-wireless-security.psk:$wappass'|' /etc/piwifiap/piwifiap.secret
 }
 
 function config_systemd-networkd() {
 	echo "Configuring as wireless access point using systemd-networkd."
 	get_ap_params
-	# Save network system in config file
-	sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap.conf
+	# Save network system type in config file
+	sed -i 's,'network_system=.*','network_system="\"systemd-networkd\""',' /etc/piwifiap/piwifiap.conf
 	
 	apt install hostapd
 	systemctl unmask hostapd
@@ -97,19 +98,34 @@ function config_NetworkManager() {
 	get_ap_params
 	
 	# Clean up a possible failed previous attempt
-	nmcli con del piwifi-ap >/dev/null 2>&1
+	nmcli con del piwifi-hotspot >/dev/null 2>&1
 	nmcli con del piwifi-ethernet >/dev/null 2>&1
-	nmcli con del piwifi-apbridge >/dev/null 2>&1
+	nmcli con del piwifi-bridge >/dev/null 2>&1
 
-	# Save network system in config file
-	sed -i 's,'network_system=.*','network_system="\"NetworkManager\""',' /etc/piwifiap.conf
 	
-	nmcli device wifi hotspot ssid $wapssid password $wappass
-	nmcli connection add type bridge con-name 'Bridge' ifname bridge0
-	nmcli connection add type ethernet slave-type bridge con-name 'Ethernet' ifname eth0 master bridge0
-	nmcli connection modify 'Hotspot' master bridge0
-	nmcli connection up Bridge
-	nmcli connection up Hotspot
+	# Save network system type in config file
+	sed -i 's|'network_system=.*'|'network_system="\"NetworkManager\""'|' /etc/piwifiap/piwifiap.conf
+		
+	# create bridge interface
+	nmcli con add type bridge con-name piwifi-bridge ifname bridge0
+	
+	# add ethernet to bridge
+	nmcli con add type ethernet slave-type bridge con-name piwifi-ethernet ifname eth0 master bridge0
+	
+	# create access point
+	nmcli con add type wifi ifname wlan0 mode ap con-name piwifi-hotspot ssid $wapssid
+	nmcli con modify piwifi-hotspot wifi-sec.key-mgmt wpa-psk
+	nmcli con modify piwifi-hotspot 802-11-wireless.band bg
+
+	# add wifi to bridge
+	nmcli con modify piwifi-hotspot master bridge0 slave-type bridge
+
+	# activate bridge
+	nmcli con up piwifi-bridge
+
+	# activite wifi
+	nmcli con up piwifi-hotspot passwd-file /etc/piwifiap/piwifiap.secret
+
 }
 
 current_user=$(whoami)
@@ -121,18 +137,20 @@ then
 fi
 echo ""
 echo ""
-echo "If this terminal connects to a network using ethernet, it can be configured"
-echo "as a wireless access point for other terminals. Would you like to configure"
-echo -n "this terminal as an access point? [y/N]: "
+echo "If this system connects to a network using ethernet, it can be configured"
+echo "as a wireless access point for other systems. Would you like to configure"
+echo -n "this system as an access point? [y/N]: "
 read wapconf
 if [[ "$wapconf" == "Y" || "$wapconf" == "y" ]]
 then
 	# Determine if we are using NetworkManager or systemd-networkd
     echo ""
     echo "Copying files..."
-    chmod +x apsetup/usr/local/bin/*
-    cp -Rv apsetup/usr/local/bin/* /usr/local/bin
-    cp -Rv apsetup/etc/* /etc
+    chmod +x apsetup/usr/local/bin/wap-*
+    cp -R apsetup/usr/local/bin/* /usr/local/bin/
+    cp -R apsetup/etc/* /etc/
+	chown -R root:root /etc/piwifiap
+	chmod 600 /etc/piwifiap/*
     if systemctl status dhcpcd.service|grep -q "Active: active (running)"
     then
         config_systemd-networkd
@@ -155,12 +173,23 @@ then
 	echo ""
 	echo "To disable the access point altogether in the future, run:"
 	echo "	sudo wap-disable"
-	echo "at a command prompt and reboot the terminal. To re-enable it, run:"
+	echo "at a command prompt and reboot. To re-enable it, run:"
 	echo "	sudo wap-enable"
-	echo "at a command prompt and reboot the terminal."
+	echo "at a command prompt and reboot."
 	echo ""
-	echo -n "Press enter key to continue..."
-	read cont
+	echo "The system must be rebooted for the configuration to take effect."
+	echo ""
+	read -p "Would you like to reboot now? [Y/n]: " -r rebootok
+	case "$rebootok" in
+		"y" | "Y" | "")
+			reboot
+			;;
+		*)
+			echo "You may continue to use the system, but the access point will not be"
+			echo "functional until you reboot."
+			exit 0
+			;;
+	esac
 else
 	exit 2
 fi